Smart Battery System Development
VEICMPII-24/3000/70-32GX Victron Energy MultiPlus-II Inverter & SLA/LiFePO4 Charger 24V 3000VA 70A - 32A Transfer Switch with inbuilt GX PMP242306000
VEICMPII-24/3000/70-32GX Victron Energy MultiPlus-II Inverter & SLA/LiFePO4 Charger 24V 3000VA 70A - 32A Transfer Switch with inbuilt GX PMP242306000
Couldn't load pickup availability
MultiPlus-II GX
An Inverter/Charger with device networking built-in, the MultiPlus-II GX communicates with a solar charger, batteries, and other devices to control a grid-connected, off-grid, or remote power installation. Capable of parallel operation for increased power output, or battery charge-rates, the MultiPlus-II GX can also be configured for three-phase supply. A host of advanced features - such as uninterrupted power supply, setting load limits, and supplementing limited grid-power availability with battery power - can all be controlled straight from your phone or smart device. Remote monitoring is also possible.
A MultiPlus-II with LCD and GX functionality
The MultiPlus-II GX integrates a MultiPlus-II inverter/charger and a GX device with a 2 x 16 character display.
Display & WI-FI
The display reads battery, inverter and solar charge controller parameters.
The same parameters can be accessed with a smartphone or other Wi-Fi enabled device.
GX device
The integrated GX device includes:
- A VE.Can interface. This can be used to connect to Victron VE.Can devices (eg VE.Can MPPTs), or the port can be reconfigured via the Remote Console for use with a compatible CAN-bus Li-ion Battery.
- A USB port.
- A Ethernet port.
- A VE.Direct port.
Applications
The MultiPlus-II GX is intended for applications where additional interfacing with other products and/or remote onitoring is required, such as on-grid or off-grid energy storage systems and certain mobile applications.
Parallel and three phase operation
Only one GX unit is needed in case of Parallel and three phase operation.
 |
INSTALLATION TO AUSTRALIAN STANDARDS REQUIRED
|
